Bung Mounted Mixer Designs
Economy Direct Driven Portable Mixer Designs.
Economy Gear Drive Portable Mixer
Top Entering Mixers
Right Angle Agitators Agitation
Quick E_Quote
Electronic Catalog
Mail ACUMIX Catalog Request
Mixing Application
Mixing Applications & Markets

Economy Gear Driven Swivel-Wall Mounted Portable Mixers Model AQWG - Specifications

Economy Gear Driven Swivel Wall Mounted MixersACUMIX Industrial Mixers manufactures economy swivel mounted wall mounted gear driven portable mixers.  We also have numerous other open and closed tank (hermetically seals and pressurized} mixer design mounting options available.  Please reference our mixer specifications and pricing matrix below. 

Today's economy gear driven swivel-wall mounted portable mixing applications demand durable process equipment accompanied by total support for your mixing needs.  We offer a complete line portable mixers.  We provide superior materials of construction throughout to give each mixer the strength & reliability that ensures the performance to the standards of each Industrial Portable Mixer design.

Pricing Matrix: Economy Gear Driven Swivel Mounted Clamp or Cup Plate Mounted Portable Mixers
Mixer Selections (Sizing): Viscosity vs. Tank Volume, etc.

ACUMIX Mixer Models AQWE is our economy top entering open tank swivel wall mounted mixer with a 316L {Low Carbon} Stainless Steel wall mounting bracket for mounting to a suitable support structure.  Model AQWE features a 98% efficient high strength single helical gear reduction.  The motor coupling will be constructed of 316L {Low Carbon} stainless steel for precise alignment to minimize shaft deflection and to enable ease of installation.  1750 RPM motor options include both 115/208-230 Volt, 1 phase and 208-230/460 Volt 3 Phase, TEFC (Totally Enclosed Fan Cooled) designs.  XP (Explosion Proof - Class I, Group D, Class II, Group F&G, T3C) and intrinsically safe variable speed Air Motors are also available.  Variable speed motor options are available upon request. The agitator shaft and propeller are as specified, which are measured from the mixers mounting base.  All wetted parts will be constructed of 316L {Low Carbon} Stainless Steel.  All hardware will be 316SS.    Each mixer will be "Manufactured in USA" and will be built with pride and dedication. 


| PO Box 6867  | Harrisburg, PA 17112-0867
Sales & Engineering Office
| 805 Harrogate Dr  | Harrisburg, PA 17111
Phone: 800-683-2011 (Sales Only)  717-540-9738
| Fax: 419-616-1524 or 630-869-8821| ACUMIX web site: www.acumix.org