|
| |
Economy Direct Driven Drum Lid
Pedestal Mounted
Portable Mixers Model AQPL - Specifications
Fixed Mounted
Economy Direct Driven Drum Lid Mounted Arrangements.
|
 Industrial
Portable Mixers manufactures
an economy direct driven fixed drum lid mounted portable
mixers. We also have numerous other open and closed tank (hermetically seals and
pressurized} mixer design mounting options available. Please
reference our mixer specifications and pricing matrix below.
Today's economy direct driven
drum lid mounted portable mixing applications demand durable process equipment
accompanied by total support for your mixing needs. We offer a complete
line portable mixers. We provide superior materials of construction
throughout to give each mixer the strength & reliability that ensures the
performance to the standards of each Industrial Portable Mixer design.
|
 |
 |
Industrial
Portable Mixer Models AQPL
top entering open tank fixed mounted mixer with a 316L {Low
Carbon} Stainless bolt-on base plate will be mounted to a heavy gage 304
Stainless Steel Drum Lid Assembly with 316LSS internal reinforcement
plate. The motor coupling is located
above the mixers mounting base and will be
constructed of 316L {Low Carbon} stainless steel for precise alignment to minimize shaft
deflection and to enable ease of installation.
Standard motor options include: 1750 RPM's both 115/208-230 Volt,
1-phase, 60 hertz and 208-230/460 Volt, 3-Phase, 50/60 Hertz, TEFC (Totally
Enclosed Fan Cooled) designs with commercially standard paint. Available
motor upgrades or options include:
 |
Food grade” high pressure wash down
all stainless or with electrostatically white epoxy finish, with
tropicalized class F insulation, TENV or
TEFC, and a 1.15 Service Factor
|
|
Explosion Proof - Class I, Group
D or C&D, Class II, Group F&G, T3C)
|
|
Intrinsically safe {suitable for
explosion proof environments) variable speed rotary vane or piston type air
motors totally enclosed with air muffler. |
|
AC
& DC variable
speed motor options. |
The agitator shaft and maximum effect propeller(s) are as specified, which are measured
from the mixers mounting base. All wetted parts will be constructed of
316L {Low Carbon} Stainless Steel (with 316SS hardware). Each
mixers will be "Manufactured in USA" and
will be built with pride and dedication.
02.13.17
|
