ACUMIX Industrial Mixers manufactures economy swivel mounted C-Clamp or Cup Plate mounted gear driven portable mixers.  We also have numerous other open and closed tank (hermetically seals and pressurized} mixer design mounting options available.  Please reference our mixer specifications and pricing matrix below. 

MODEL AQE SPECIFICATIONS: Economy Gear Driven Mixer
ACUMIX Mixer Model AQPE top entering open tank fixed mounted mixer with a 316L {Low Carbon} Stainless bolt-on pedestal base plate assembly for mounting to a suitable horizontal or angled support structure.  The motor coupling is located above the mixers mounting base and  will be constructed of 316L {Low Carbon} stainless steel for precise alignment to minimize shaft deflection and to enable ease of installation.  The cast iron gearbox with commercially standard paint features a 98% efficient high strength single helical gear reduction with a minimum AGMA Service Factor of 1.5 based on motor nameplate.  Please note that our gear reduction is not made from inefficient "soft wear" worm gearing, is not a low quality planetary gear.  The removable agitator/gearbox coupling is constructed of 316LSS stainless steel for precise alignment to minimize shaft deflection and to enable ease of installation.  Please note that non-aligning, non-concentric split couplings are not used.  Standard motor options include: 1750 RPM's both 115/208-230 Volt, 1-phase, 60 hertz and 208-230/460 Volt, 3-Phase, 50/60 Hertz, TEFC (Totally Enclosed Fan Cooled) designs with commercially standard paint.  Available motor upgrades or options include:  

	Food grade” high pressure wash down all stainless or with electrostatically white epoxy finish, with tropicalized class F insulation, TENV  or TEFC, and a 1.15 Service Factor
	Explosion Proof - Class I, Group D or C&D, Class II, Group F&G, T3C)
	Intrinsically safe {suitable for explosion proof environments) variable speed rotary vane or piston type air motors totally enclosed with air muffler.
	AC & DC variable speed motor options.

The agitator shaft is measured from the mixers mounting and is supplied with maximum effect folding propeller(s) as specified in the pricing table.  All wetted parts will be constructed of 316L {Low Carbon} Stainless Steel (with 316SS hardware).    Each mixers nameplate will specifically state, "Manufactured in USA" and will be built with pride and dedication.  Motor/gearbox chemical resistant paint optional upgrade is available upon request.  See pricing link above.

02.13.17