|
| |
Economy Gear Driven Drum Lid Mounted
Portable Mixers Model AQLE - Specifications
Fixed Mounted
Economy Direct Driven Drum Lid Mounted Arrangements.
|
 ACUMIX
Industrial Mixers manufactures
an economy direct driven fixed drum lid mounted portable
mixers. We also have numerous other open and closed tank (hermetically seals and
pressurized} mixer design mounting options available. Please
reference our mixer specifications and pricing matrix below.
Today's economy direct driven
drum lid mounted portable mixing applications demand durable process equipment
accompanied by total support for your mixing needs. We offer a complete
line portable mixers. We provide superior materials of construction
throughout to give each mixer the strength & reliability that ensures the
performance to the standards of each Industrial Portable Mixer design.
|
 |
 |
ACUMIX Mixer Models AQLE
top entering open tank fixed mounted mixer with a 316L {Low
Carbon} Stainless Steel Drum Lid Assembly. The motor coupling, located
below the mixer mounting base, will be
constructed of 316L {Low Carbon} stainless steel for precise alignment to minimize shaft
deflection and to enable ease of installation. The
cast iron gearbox with commercially standard paint features a 98% efficient high strength single helical gear reduction with a
minimum AGMA Service Factor of 1.5 based on motor nameplate.
Please note that our gear
reduction is not made from inefficient "soft wear" worm gearing, is
not a low quality planetary gear. The removable
agitator/gearbox coupling is
constructed of 316LSS stainless steel for precise alignment to minimize shaft
deflection and to enable ease of installation. Please
note that non-aligning, non-concentric split couplings are not used.
Standard motor options include: 1750 RPM's both 115/208-230 Volt,
1-phase, 60 hertz and 208-230/460 Volt, 3-Phase, 50/60 Hertz, TEFC (Totally
Enclosed Fan Cooled) designs with commercially standard paint. Available
motor upgrades or options include:
 |
Food grade” high pressure wash down
all stainless or with electrostatically white epoxy finish, with
tropicalized class F insulation, TENV or
TEFC, and a 1.15 Service Factor
|
|
Explosion Proof - Class I, Group
D or C&D, Class II, Group F&G, T3C)
|
|
Intrinsically safe {suitable for
explosion proof environments) variable speed rotary vane or piston type air
motors totally enclosed with air muffler. |
|
AC
& DC variable
speed motor options. |
The agitator shaft is measured from the mixers mounting and is supplied
with maximum effect folding propeller(s) as specified in the pricing
table. All wetted parts will be constructed of
316L {Low Carbon} Stainless Steel (with 316SS hardware). Each
mixers nameplate will specifically state, "Manufactured in USA" and
will be built with pride and dedication. Motor/gearbox chemical resistant
paint optional upgrade is available upon request. See pricing link above.
02.13.17
|
